CCTV PASSWORD PROBLEM

S.O.S  CCTV PASSWORD PROBLEM, DIFFICULT TO RESET, NEED HELP!

I try to use all default password but I can't remove and reset to factory default.

LIST OF PASSWORD:
LOGIN              PASSWORD
 admin               admin
 iwam                iweb
 111111             111111
 000000             000000

 TO ALL: 
      Please, I badly needed all of your help guys if you have the solution for this CCTV password problem...


link1

Router

POWERFULL ROUTER

Ebook Speaker

Cool Ebook Reader Speaker using linux console.

code: ebook-speaker filename_ofbook.epub  or  'ebook-speaker filename.ext'

TL-WR340 HARD RESET

TPLINK TL-WR340 HARD RESET - DIFFICULT TO RESET
- it takes a whole day to think and resolved the problem of my tplink router and i made it, to reset for many times to repeat all  and repeat all over again, but in order to solve this problem, you need to follow this walk through.....

Here's the procedure:

• Power on Router - with WAN and LAN connection
• Look for reset button, hold and press at-least 20 sec. of the main unit
• While holding down the reset button remove power cable out of the unit
• Release the Reset Button , Press and hold again the Reset Button
• While you are holding the reset button, plug the power at the back of the unit at-least 20 sec. or more and check the LED light to restart.. 
• You're done the router is fully reset to factory default.

Route to Bridge

ROUTER - ACCESS POINT BRIDGE - REPEATER TO EXTENDER

I've just replace the original firmware of my 2 linksys router WRT160N  and upgraded to DD-WRT and its great..I move around from AP to AP (Primary network and extend my connection to other hub) is very useful...I'm planning to move around my TPLINK router if change it OPENWRT.....Another thing that i try is configure the WDS and QSS of the original firmware of the TPLINK and  the 2 router could communicate and see each other  wireless to wireless,  but the problem is that -  i need to reconfigure it every-time i connect to the main router.....This is the future problem that i need to think....so i'm looking forward for a comments my friendly neighborhood of the net. :-)

sources:
http://www.tp-link.com/en/article/?id=171
http://www.dd-wrt.com/wiki/index.php/Wireless_Bridge

MAKE A USB BOOTABLE WINDOWS XP IN LINUX DEBIAN BASED

TO CREATE BOOTABLE USB WINDOWS OS INSTALL "WINUSB" 

WinUSB is a tool that you can make your USB FlashDrive Bootable for MS Windows image(ISO). 

Here's the code:
sudo add-apt-repository ppa:colingille/freshlight
sudo apt-get update 
sudo apt-get install winusb 

  link

2014

WELCOME YEAR 2014 - MORE POWER TO ALL TECHIES, LINUX UNIX USER, GURU, EXPERT, SPECIALIST, GEEK, ETC...